outdoorcooling.org Blog

New portable high pressure outdoor cooling system is available!

Administrator — Thu, 22 Jul 2010 07:54:47 +0000

Our new portable outdoor cooling system is the most compact and easy to use high pressure misting system available. Simply connect a garden hose, plug it in and you have a complete high pressure mist cooling system with a 3-speed, high velocity mist fan. This unit can be used for heat remediation, to cool parties and outdoor events and even for spot cooling in warehouses and on job sites. A built in 1 micron filter keeps the nozzles from clogging and makes set up a snap. This is a true 1000 psi max high pressure mist cooling system and comes with a 440 stainless steel pump housing. This pump can run up to 3 additional outdoor cooling misting fans.

New Stainless Steel Mist Cooling Pump

Administrator — Mon, 19 Jul 2010 00:26:16 +0000

Our new high pressure mist cooling pump now comes in a 404 stainless steel enclosure! The 404 stainless steel enclosure will protect your pump for many years to come.

This .25 gallon per minute, 1000 PSI misting pump is the most efficient high pressure misting pump on the market drawing only 1.4 Amps at full load! It is also whisper quiet and built to last.

If you having a difficulty picking a pump, feel free to leave a comment, send us an email or give us a buzz.

Ruby mist nozzles are here!

Administrator — Tue, 13 Jul 2010 20:24:53 +0000

Check out our new stainless steel mist cooling nozzles w/ real ruby orifices. Ruby doesn’t wear down from the friction of the high pressure water so these nozzles may be the last nozzles you ever buy. The nozzles come with a built in anti-drip ball and spring and a removable turbine. All of the ruby nozzles can be easily disassembled and completely cleaned!

The ruby nozzles produce the nicest coning of the mist that we have seen.

Outdoor Cooling Systems new ruby mist nozzles are the best nozzles available!

New mist cooling nozzle w/ ruby orifice.

Outdoor Cooling Systems ruby mist nozzles w/ stainless steel body are available now!

Light shining through the orifice of our stainless steel ruby nozzle

Double Ferrule Compression Fittings

Administrator — Mon, 10 May 2010 23:23:09 +0000

Our exclusive double ferrule compression fittings for the mist cooling industry provide the most reliable connections available. For a permanent installation we recommend using our compression fittings when ever possible. They can be used on high pressure nylon mist tubing as well as stainless steel and copper mist tubing.

Feel free to contact us is you have any questions about installing compression fittings.

Our systems are in use in many landfills, factories, resorts, and custom homes. Please see the gallery for photos and videos of our high pressure mist cooling systems in action.

High Pressure Mist Cooling Compression Fittings

Double Ferrule High Pressure Compression Fitting

Outdoor Cooling Systems nozzle extension head. Double ferrule compression fittings

Mist Fans or Mist Line?

Administrator — Tue, 30 Mar 2010 14:49:31 +0000

When choosing a mist cooling system, one has to decide whether to use mist fans, mist line or a combination of the two.

Our high pressure mist cooling fans evaporate 100% of the mist and circulates the air to provide maximum cooling. It is not uncommon to see temperature drops of 16-25 degrees! Mist cooling fans are the most effective way to cool an area!

If electrical outlets for the fan are not nearby or if you would prefer not to see a mist cooling fan than mist line or misting stakes are for you.

Mist line is usually installed along the outside perimeter of covered patios, awnings, gazebos etc. A high pressure mist cooling system evaporates the tiny water droplets in the air cooling the air without getting anything wet. This causes a curtain of cool air surrounding you.

No structure, no problem. High pressure mist cooling/fog effects stakes can be hidden in landscaped areas. When a perimeter oh high pressure mist is created around an area, no matter which way the wind blows, the cool air will move through the target area. When there is no wind the air will mix and still cool the target area.

Feel free to contact us with questions if you are designing a high pressure misting system.

Spring is here and maintenance of your mist cooling system is critical.

Administrator — Fri, 19 Mar 2010 22:32:00 +0000

Maintenance of high pressure mist cooling systems will help you get the most out of your system and prevent many common problems. High pressure mist cooling systems require excellent filtration to protect your pump and prevent the nozzles from getting clogged. Mist cooling systems should also be flushed when the filters are replaced. Many high pressure misting pumps required periodic oil changes, the time between oil changes can vary from manufacturer to manufacturer. Feel free to ask any questions you may have if you are planning to do the maintenance yourself.

Or call now to schedule you preventative maintenance.

Got Outdoor Cooling Questions?

Administrator — Tue, 26 May 2009 19:26:30 +0000

Feel free to post your high pressure mist cooling questions here. You can also e-mail or call us if you prefer. We can even help you design your misting system and can answer any questions you may have about mist cooling systems